Shaanxi Peakrise Metal Co.,Ltd
Idea of development: Prestige First, Quality First and Service First Business goal: The leading domestic, international standarded Quality assurance: keep promise ,be based on honesty,stick to
Add to Cart
Molybdenum Rhenium Alloy Wire Diameter 0.5mm
1. Description Of Molybdenum Rhenium Alloy Wire Diameter 0.5mm:
Like other molybdenum-based alloys, molybdenum-rhenium alloy wire (Mo-Re) is also a molybdenum-based material with a small amount of metal binder added. Due to the difference in the addition of metal binders, the physical, chemical, thermal, magnetic properties, production processes and specific uses of Mo-Re alloys and other molybdenum alloys are also quite different.
2. Size Of Molybdenum Rhenium Alloy Wire Diameter 0.5mm:
| Product Name | Main Type | Main Diameter(mm) |
|---|---|---|
| Molybdenum Rhenium Alloy Wire | Mo-20%Re Mo-41%Re Mo-44.5%Re Mo-47.5%Re | Φ0.1,Φ0.2,Φ0.25, Φ0.3,Φ0.35,Φ0.5 |
| Molybdenum Rhenium Alloy rod | Φ1~Φ17×L |
Other size and content rate,pls inquiry for us,we can custom.
3. Performance Of Molybdenum Rhenium Alloy Wire Diameter 0.5mm:
From the chemical composition point of view, Mo has a melting point of 2622 °C and a boiling point of 5560 °C. It has the characteristics of high hardness, low thermal expansion coefficient, good high temperature strength, corrosion resistance and good electrical and thermal conductivity; Re has a melting point of 3180 °C and a boiling point of 5627℃, with excellent plasticity, mechanical properties, creep resistance, oxidation resistance, wear resistance and corrosion resistance. Therefore, the alloy composed of the two has the advantages of both molybdenum and rhenium.
According to different rhenium content, molybdenum-rhenium alloy rod can be divided into many types, such as Mo-20%Re, Mo-41%Re, Mo-44.50%Re, Mo-47.5%Re and Mo-50%Re, etc. Different types of products performance and specific use vary. Under certain circumstances, the plasticity, ductility, and high temperature strength of alloy products are improved with an increase in rhenium content. Generally, Mo-5%Re and Mo-41%Re are used as thermocouple wires and structural parts of flight equipment, and Mo-50%Re is used as high temperature structural parts.
4. Production method Of Molybdenum Rhenium Alloy Wire Diameter 0.5mm:
The process route of powder metallurgy is as follows: mix molybdenum powder and rhenium powder, then pre-sinter into molybdenum-rhenium pre-sintered ingot, and then sinter at high temperature into molybdenum-rhenium sintered ingot.
Do you want to know more about our products?