Shaanxi Peakrise Metal Co.,Ltd
Idea of development: Prestige First, Quality First and Service First Business goal: The leading domestic, international standarded Quality assurance: keep promise ,be based on honesty,stick to
Add to Cart
Molybdenum Heat Element For Hot Zones
1. Description Of Molybdenum Heat Element For Hot Zones:
The commonly used models of molybdenum heating element are molybdenum wire heating element and molybdenum rod heating element. There are two types of molybdenum wire heating elements: one-section and two-section. They are constructed from many strands of molybdenum alloy wire. The molybdenum rod heating element is made of pure molybdenum rods with a diameter of 5-16mm and a content of 99.95% high-temperature molybdenum. indivual. The length of the heating part is 300-1200mm. The length of the U-shaped heating element is between 1000-4000mm. The operating temperature is 1000-1800 ℃, and it can be used in various atmosphere furnaces or vacuum furnaces. The corrosion resistance is about twice that of silicon carbon rods and silicon molybdenum rods.
2. Specification Of Molybdenum Heat Element For Hot Zones:
Special supplier of Mo heater element
Fine shape according to customer's drawing
Molybdenum Heat Element
We provide heating elements for hot zones in the form of strip heaters, wire and rod elements, stranded-wire elements, or mesh heaters depending on the furnace design and operating temperature.
1) Molybdenum Strip Heater
Made of Mo, MoLa, TZM
Very fine shape
High mechanical and thermal stability
Low creep deformation
Supply heating elements according to user's drawing
2) Molybdenum heater wire and rod
Size: dia.0.3 - 3 mm x coil
dia. 3 - 11 mm x 6000 mm long
Very fine surface and density uniformity
3. Physical And Chemical Properties Of Molybdenum Heat Element For Hot Zones:
| Product name: | Mo heater element | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tensile strength | 610 Mpa | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Elongation | ≥10% | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Purity | ≥99.95%,99.97% | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Size: | dia.0.3 - 3 mm x coil dia. 3 - 11 mm x 6000 mm long | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Surface: | black | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Use temperature | 1100~1800°C | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Quantitative analysis | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Element | Ca | Pb | Fe | Mg | Si | Bi | Al | Ni | P | Cu | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Concentration(%) | 0.0006 | 0.0006 | 0.001 | 0.0006 | 0.003 | 0.0006 | 0.003 | 0.0006 | 0.001 | 0.0006 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Element | C | O | Sb | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Concentration(%) | 0.001 | 0.005 | 0.0006 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Purity(Metallic Base) Mo≥99.95% | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Molybdenum Heater element can be used for Hydrog enenvironment furnace, vacuum furnace etc.
Other Parts For Hot Zones:
Mo crucible Mo hammer Mo sheet Mo fastener
Please click below button for learn more our products.